護坡磚正確的施工流程
護坡磚的使用可以有效的防護水源對土地的侵蝕，減少路面不平整的現象發生。因此在很多水流附近都會有護坡磚的身影，還會在道路兩旁種上綠植，同樣護坡磚也被使用到，其獨特的結構使得在控制水流方面非常不錯。那么山東護坡磚的施工流程是什么呢？
The use of slope protection bricks can effectively protect the soil from water erosion and reduce the occurrence of uneven pavement. Therefore, there are slope protection bricks around many water flows, and green plants are planted on both sides of the road. Similarly, slope protection bricks are also used, and their unique structure makes them very good at controlling water flow. So what is the construction process of slope protection bricks in Shandong?
1、挖掘邊沿基坑，坑底填充適當的材料并震實，砌筑上下沿擋板，擋板頂標高砌至與聯鎖護坡底標高一平。
1. Excavate the edge of the foundation pit, fill the pit bottom with appropriate materials and vibrate it firmly. Build the upper and lower edge baffles, and the top elevation of the baffles shall be level with the elevation of the interlocking slope protection bottom.
2、在已經完成的基礎面上鋪設土工布或者級配碎石。
2. Lay geotextile or graded crushed stone on the completed foundation surface.
3、從下邊沿開始聯鎖鋪設三行聯鎖式護坡磚，磚的長度方向沿著水流方向反向鋪設，下沿..行磚有一般砌入趾墻中，與毛石或混凝土趾墻相錨固，下沿的第二行聯鎖磚的下邊沿與趾墻墻面相交。
3. Interlock and lay three rows of interlocking slope protection bricks starting from the lower edge, with the length direction of the bricks being laid in the reverse direction of the water flow direction, and the lower edge Row bricks are generally built into the toe wall and anchored to the rubble or concrete toe wall. The lower edge of the second row of interlocking bricks at the lower edge intersects the toe wall surface.
4、砌筑下沿趾墻，用混凝土或者毛石混凝土將剩余部分的趾墻連同錨固入趾墻的聯鎖磚一起砌筑，使得趾墻符合設計要求的尺寸。
4. Build the lower toe wall, and use concrete or rubble concrete to build the remaining part of the toe wall together with interlocking bricks anchored into the toe wall, so that the toe wall meets the dimensions required by the design.
5、從左下角鋪設其他護土磚，鋪設方向與趾墻平行，不得垂直趾墻方向鋪設，以防產生累計誤差，影響鋪設質量。
5. Lay other retaining bricks from the lower left corner in a direction parallel to the toe wall and not perpendicular to the toe wall to prevent cumulative errors that affect the laying quality.
6、將聯鎖磚鋪設至上沿墻內，砌筑上沿墻，使得上沿部分聯鎖磚與上沿墻錨固，進行聯鎖磚面層色彩處理時，清除聯鎖磚表面浮灰及其他雜物、污染，如需水洗時，可用水沖洗，等水干后即可進行色彩處理。
6. Lay interlocking bricks into the upper edge wall, and build the upper edge wall so that the upper edge part of the interlocking bricks are anchored to the upper edge wall. When conducting color treatment for the surface layer of the interlocking bricks, remove the floating ash and other debris and pollution on the surface of the interlocking bricks. If it is necessary to wash with water, it can be washed with water, and the color treatment can be carried out after the water is dry.
7、用干砂、碎石或者土填充磚孔和接縫。
7. Fill brick holes and joints with dry sand, crushed stone, or soil.
8、為形成轉角或者直邊，可用無齒鋸切割護坡磚以得到相應的規格和角度。
8. To form a corner or straight edge, a toothless saw can be used to cut the slope protection brick to obtain the corresponding specifications and angles.
護坡磚正確的施工流程相關內容就講解到這里了，您對此有怎樣的疑惑或者需求，就來我們網站http://www.xlf123.cn咨詢了解吧！
That's all about the correct construction process for slope protection bricks. If you have any doubts or needs about this, please come to our website http://www.xlf123.cn Consult and understand!
上一篇：植草磚的種草方法參考
相關產品
相關新聞
資訊推薦Information
聯系我們Information
- 濟南龍岳建材有限公司
- 電話：13905418708
- 地址：濟南章丘區棗園街道吉祥村工業園
