小说阅读器,盗墓笔记同人小说,灵域

怎樣選擇合適的電纜溝蓋板？

來源：http://www.xlf123.cn/ 時間：2023-07-11 瀏覽量：0

1、強度比較高，承載能力好具備一定的承載能力和強度是板材基本的要求，根據不同的運用場所，來選擇板材的材料。很明顯，傳統的塑料和木質材料是不能夠滿足電纜溝蓋板的要求的。以往的蓋板都是水泥材料的，現在出現了復合材料以及玻璃鋼等。

1. High strength, good load-bearing capacity, and having a certain load-bearing capacity and strength are the basic requirements of the board. The material of the board is selected according to different application locations. It is obvious that traditional plastic and wooden materials cannot meet the requirements of cable trench covers. Previously, the cover plates were made of cement materials, but now composite materials and fiberglass have emerged.

2、恬靜功用好，如果判斷蓋板恬靜功用怎么樣，具體要看它的韌性、導電以及導熱等方面。石質的蓋板不導電也不導熱，但是韌性不大，和金屬蓋板差不多，特別容易變形。在恬靜功用這+方面來講，玻璃鋼蓋板是比較好的選擇，不僅韌性大，而且也不導電不導熱。

2. The quiet function is good. If you judge the quiet function of the cover plate, it depends on its toughness, conductivity, and thermal conductivity. The stone cover plate does not conduct electricity or heat, but its toughness is not high, similar to that of a metal cover plate, and it is particularly prone to deformation. In terms of its tranquil function, fiberglass cover plates are a good choice. They not only have high toughness, but also do not conduct electricity or heat.
山東溝蓋板

3、封閉性強，封鎖性是衡量電纜溝蓋板質量的重要因素，封鎖性只有達到一定的要求，才能夠更好地保護電纜，才能不至于損壞電纜。想要產品封閉性強，在制作的過程中，要對承載力、角度、尺寸等進行合理的設計。

3. Strong sealing is an important factor in measuring the quality of cable trench covers. Only when the sealing meets certain requirements can cables be better protected and not damaged. To achieve strong product closure, it is necessary to design the bearing capacity, angle, size, and other factors reasonably during the production process.

安裝方法

Installation method

電纜溝蓋板按照厚度分為分為：40mm 厚復合材料蓋板、50mm 厚復合材料蓋板、60mm 厚復合材料蓋板、70mm 厚復合材料蓋板、80mm 厚復合材料蓋板。

The cable trench cover plate is divided into 40mm thick composite material cover plate, 50mm thick composite material cover plate, 60mm thick composite material cover plate, 70mm thick composite material cover plate, and 80mm thick composite material cover plate according to thickness.

為了確保復合材料蓋板的正常使用，應十分注重電纜蓋板安裝質量,做到尺寸準確、安裝堅固、外表清潔美觀，根據復合材料蓋板的技術標準，定以下安裝細則：

In order to ensure the normal use of composite material cover plates, great attention should be paid to the installation quality of cable cover plates, ensuring accurate dimensions, sturdy installation, and clean and beautiful appearance. According to the technical standards of composite material cover plates, the following installation rules are formulated:

1、在做基礎前先確定常規蓋板尺寸，根據蓋板尺寸預留嵌入尺寸。

1. Before making the foundation, determine the regular cover plate size and reserve the embedded size based on the cover plate size.

2、放置電纜蓋板的支撐基座須平整、堅固、無殘留雜物。

2. The support base for placing the cable cover plate must be flat, sturdy, and free of residual debris.

3、鋪裝蓋板時每塊蓋板應兩人協同鋪裝，不可單人鋪裝或先放蓋板一端再放另一端。

3. When laying the cover plate, two people should work together to lay each cover plate. It is not allowed to lay the cover plate alone or place one end of the cover plate first and then the other end.

4、鋪裝完成后應檢查電纜蓋板是否鋪裝平整，若未鋪裝平整應及時處理。

4. After the laying is completed, it is necessary to check whether the cable cover plate is laid flat. If it is not laid flat, it should be dealt with in a timely manner.

5、產品如需切割時應注意安全，蓋板內有鋼筋骨架，切割時應事先看好鋼筋骨架位置，防止人身或設備棉傷。

5. If the product needs to be cut, attention should be paid to safety. There is a steel skeleton inside the cover plate, and the position of the steel skeleton should be checked in advance to prevent personal or equipment damage.

上一篇：路沿石在鋪設施工需要注意

下一篇：透水磚的起源及選擇的分類！

相關產品